CAT6 UTP 550MHZ SNAGLESS MOLDED PATCH CORD
Login
Quick Overview
Quest offers Cat6 snagless molded patch cords are constructed of 550MHz Cat6 stranded UTP cable. Features include gold plated contacts, and a slim strain relief molded tab for protection.
Description
- Built with 550MHz stranded UTP cable
- Exceeds Cat6 ANSI/TIA 568C.2 standards
- Gold plated contacts for better conductivity
- Snagless slim molded strain relief with flexible molded tab protection
- Constructed of UL listed cable
- Non-molded custom lengths available upon request
Specifications
Category / Type | Cat6 550MHz / UTP |
# of Conductors | 8 |
# of Pairs | 4 |
AWG | 24 |
AWG Stranding | 7 Cond./0.20 mm ± .02 mm |
Conductor Material | Stranded Bare Copper |
Drain Wire | None |
Wiring Scheme | 568A/B |
Plug / Termination | RJ45 (8p8c) Polycarbonate |
Molded Boot | Rubber with Snagless Tab |
Contacts | Phosphur Bronze w/ 3uʺ Gold over Nickel Plating |
Insulation Material | High-Density Polyethylene |
Insulation Nominal Diameter | 1.02 mm ± 0.02 mm |
Divider | High-Density Polyethylene |
Jacket Material | PVC (Polyvinyl Chloride) |
Jacket Nominal Diameter | 6.0 mm ± 0.1 mm |
Ripcord | Nylon Rope |
Connection | Mated |
Max. Pulling Tension | 40 lbs |
Min. Bend Radius | 1.5 in |
Dielectric Strength | 1500V RMS @ 60Hz for 1 minute |
Current Rating | 1.5 Amps |
Insulation Resistence | 500M Ohm Minimum |
Max. Contact Resistance | 20m Ohm |
Durabilities | 1000 cycles |
CMR Rated | Yes |
Telecommunications Standards | Category 6 – ANSI/TIA 568C.2 |
Compliance | UL, RoHS |